If your Swiffer WetJet isn’t spraying like it used to, don’t worry – you’re not alone! A lot of people are reporting this issue, but luckily it’s an easy fix. In this guide, we’ll tell you how to solve your Swiffer WetJet spray problem!
A Swiffer wet jet is an excellent tool for cleaning floors. However, if your Swiffer wet jet won t spray, you might find it difficult to clean your floors. Don’t worry, though; you can fix the issue and get your Swiffer wet jet spraying again.
Follow These Simple Steps, See If It’s Swiffer WetJet spraying properly:
Step 1: Check The Swiffer Wet Jet For Clogs:
The first thing you should do is check the Swiffer wet jet for clogs. Often, the issue with the Swiffer wet jet not spraying is caused by a clog in the system.
To check for clogs, unplug the Swiffer wet jet and remove the water tank. Then, use a paper clip to clear any debris from the spray nozzles. Be sure to check both the front and back nozzles.
If there is debris blocking the spray nozzles, remove it and replace the water tank—plug in the Swiffer wet jet and test to see if it’s spraying correctly.
Step 2: Clean The Swiffer Wet Jet Filters:
The next thing you should do is clean the Swiffer wet jet filters. Often, clogs in the system are caused by dirty filters.
To clean the filters, remove the water tank and locate the filter cover. Open the filter cover and remove the filters. Rinse them under running water and allow them to air dry. Replace the filters and close the filter cover.
Replace the water tank and plug in the Swiffer wet jet. Test to see if it’s spraying correctly.
Step 3: Check The Swiffer Wet Jet Pump:
If the Swiffer wet jet is still not spraying properly, the issue might be with the Swiffer wet jet pump. To check the Swiffer wet jet pump, unplug the Swiffer wet jet and remove the water tank.
Locate the pump cover and unscrew it. Then, use a paper clip to clear any debris from the inlet and outlet holes. Be sure to check both the front and back holes.
If there is debris blocking the holes, remove it and replace the pump cover. Screw it back on tightly. Replace the water tank and plug in the Swiffer wet jet. Test to see if it’s spraying correctly.
Step 4: Call Customer Service:
If you’ve followed all of the steps and the Swiffer wet jet still isn’t spraying properly, the issue might be with the Swiffer wet jet itself. In this case, you’ll need to call Swiffer customer service for further assistance.
Swiffer customer service can help you troubleshoot the issue and determine if the Swiffer wet jet needs to be replaced. They can also help you find an authorized Swiffer dealer in your area.
So, if your Swiffer wet jet won t spray like it used to, don’t worry. Follow these simple steps, and you’ll be up and cleaning. Thanks for reading!
Frequently Asked Questions
How to solve the Swiffer wet jet bottle leaking problem?
If you have a Swiffer Wet Jet and the bottle is leaking, there are a few things you can do to fix the problem.
First, check to see if the bottle is properly seated in the base. If it is not, firmly press it into place.
Next, check the O-ring seal at the top of the bottle if it is damaged or dirty, clean or replace it.
Finally, make sure the cap is screwed on tightly. If it is not, tighten it up.
If you have tried all of these things and the bottle is still leaking, you may need to purchase a new one.
Swiffer Wet Jet Batteries: How Long Do They Last?
According to the manufacturer, the average battery life for a Swiffer Wet Jet is about 20 minutes. However, this will vary depending on how often you use the machine and what sort of floors you have.
If you have a lot of floor space to cover, or if your floors are particularly dirty, you may find that the batteries need to be replaced more frequently. Conversely, if you only use the Swiffer Wet Jet occasionally, or if you have relatively clean floors, you may get more life out of the batteries.
Why does my Swiffer Wet Jet not spray?
If your Swiffer Wet Jet is not spraying, there could be a few reasons why. The most common reason is that the battery may need to be replaced. Another possibility is that the pump may be clogged. If this is the case, you can try cleaning the pump by running warm water through it.
Finally, make sure that the jets are not blocked by debris. If they are, you can try cleaning them with a toothpick. If none of these solutions work, then it is possible that the motor has failed, and the Wet Jet will need to be replaced.